ALLUVI BPC-157 & TB-500 Injection Pen (40mg)  

£179.99

A combined BPC-157 and TB-500 formulation (20mg each), supplied in a 40mg pre-filled research device.

Produced exclusively for controlled laboratory R&D applications. Provided in sealed batches to support compound stability analysis, delivery mechanism evaluation, and formulation studies.
Not for human or veterinary consumption.

Each BPC-157 & TB-500 40mg Pen Kit Includes:
Pre-filled Research pen (40mg total: 20mg BPC-157 + 20mg TB-500)
Research information sheet

Storage:
– Store refrigerated (2–8°C). Do not freeze.
– Supplied in fixed-volume sealed format for laboratory analysis.


Delivery: Dispatched with a cold pack

Compare

Description

🧪 How to Use Your BPC-157 & TB-500 Injection Pen (40mg)

✅ Step-by-Step Instructions

1. Wash Your Hands
Clean hands thoroughly with soap and water to maintain a sterile environment.

2. Prepare the Pen

  • Remove the pen cap

  • Inspect the solution (must be clear, no particles)

  • Peel off the tab from a new needle

3. Attach the Needle

  • Align and twist the needle onto the pen until securely attached

  • This creates a proper seal for safe injection

4. Prime the Pen

  • Select a small dose

  • Hold the pen upright

  • Press the injection button to release air bubbles and ensure smooth flow

5. Select Your Dose

  • Turn the dose dial to your prescribed dose (2.5mg or 5mg)

  • Confirm it’s visible in the dose window

6. Choose an Injection Site
Recommended areas:

  • Abdomen (2+ inches away from the navel)

  • Thigh

  • Back of upper arm
    Rotate sites weekly to avoid irritation.

7. Inject the Dose

  • Insert the needle at a 90° angle

  • Press the injection button fully and hold for 5–10 seconds

  • Carefully remove and discard the needle in a sharps container


📏 How to Dose

Beginner Dosing Plan
Start with a lower dose to allow your body to adjust:

  • Option 1: 2.5mg every other day

  • Option 2: 5mg every other day

Dose Window Settings

  • 2.5mg = set dial to 2.5

  • 5mg = set dial to 5


🧊 How to Store Your Pen

Before First Use

  • Store in the fridge at 2°C to 8°C

  • Keep in original packaging to protect from light

  • Do not freeze – discard if frozen

After First Use

  • May be stored at room temp (up to 15°C) for up to 4 hours

  • Keep away from heat, sunlight, and moisture

  • Always replace the cap after use

  • Do not store with the needle attached

🔒 Keep out of reach of children
📩 Questions or concerns? Email: info@alluviretatrutide.co.uk


💡 Tips for Best Results

✔ Pen Usage

  • Prime before first dose (release a small drop)

  • Always use a new needle per injection

  • Hold button down 5–10 seconds for full delivery

  • Press gently with gauze afterward—do not rub

  • Rotate injection sites weekly

✔ Smart Dosing

  • Start at 2.5mg every other day

  • Increase only if advised

  • Use the dial window to control your dosage

  • Keep a simple log of usage and dose times

✔ Storage Best Practices

  • Refrigerate unused pens

  • Store used pens cool, preferably refrigerated

  • Never reuse or store with a needle attached

  • Dispose of all used needles in an approved sharps container

Reviews

There are no reviews yet.

Be the first to review “ALLUVI BPC-157 & TB-500 Injection Pen (40mg)  ”

Your email address will not be published. Required fields are marked *